A lot like The Face, but without the big metal grill. A bright urban commuter bike light ideal for those daily commutes from the ‘burbs to the big smoke. Outputting 80 lumens of light at the front and 44 at the rear this bright bike light ensures you are well seen not just to road riders ahead of you, but those behind too up to 1.2 kilometers away. With its focused 35° beam, reflective faceplate, long battery life and 5 different light modes (2 constant & 3 flash), you’re guaranteed to light up all night long, no matter where you ride. And its secret weapon? 2x front & 3x rear interchangeable straps so you can swap the lights between bikes with different sized seatpost and handlebars – including aero seatposts and oversize bars.

• LIGHT OUTPUT : FRONT 80 lumens // REAR 44 lumens
• DIMENSIONS : 42 x 42 x 62mm 
• WEIGHT : 35g
• RUNTIMES: Four Eyes run times  

FEATURES

• BEAM ANGLE : 35°
• LIGHT MODES : Steady high, steady low, strobe, fancy flash, eco flash.
  
• 100% WATERPROOF : The Blinder MOB is IP67 Tested and 100% waterproof against all elements
  
• BUTTON : Longer button push on (0.75sec) prevents accidental turn on. Short presses switch modes continuously. 
  
• INTEGRATED USB PLUG : Designed to be exposed to the elements, and then some.
  
• LEDs : Surface Mount (SMT) LED designed to provide maximum brightness level for up to 90% of the battery burn time for each mode.
  
• CHARGE TIME : 4 -5 hours (LED will turn green when fully charged)
  
• BATTERY : USB Rechargeable Lithium Polymer
  
• BIKE ATTACHMENT : Tool-less removable silicone straps for bars/posts 22 - 35mm+ diameter. Fits Aero & Oversize bars /posts.
  
• ACCESSORIES INCLUDED : For front light 2x interchangeable straps for bars 22-27mm / 28-32mm+. For rear light 3x interchangeable straps for posts 22-32mm+ and Aero seatposts.
  
• INSTRUCTIONS
• STORAGE MODE:
  
• QUICK VIEW INSTRUCTIONS
  
• To activate storage mode make sure light is first turned off. Then hold down the on/off button for 5 seconds and release when red LED comes on. This LED will stay lit until the light drops into storage mode. 
  
• To reactivate light, plug into USB port and charge as usual. Once charged light will turn on as before.
  
• CHARGING:When plugging the light into a USB port to charge a red LED will display on the on/off switch of the light to indicate that the light is charging. When fully charged this light will turn green to indicate charging is complete.